Audio-Technica M2 In-Ear Wireless Monitor System

Audio-Technica IEM Personal Mix Operation band vocal mix

Uploaded by Audio-Technica USA on 2010-11-13.

High-fidelity sound with clean, articulate mix allows you to hear yourself better at lower volume
100 selectable UHF channels
Up to 10 simultaneous systems per frequency band
Three receiver modes: Personal Mix, stereo, and mono
Personal Mix Control allows volume and mix control of two independent signals at the receiver
3.5 mm line-in jack connects to ambient microphone, click track & more
LED indicators provide easy-to-read level monitoring
XLR loop output (true pass-through) connects signal to mixing console, additional IEM system or recording device with no signal degradation
Adjustable squelch eliminates annoying static
Pilot tone protects against RF interference when the transmitter is turned off
Limiter (defeatable) helps protect your hearing from sudden peaks
Portable system is quick to load and set up
Reduces on-stage audio clutter for better overall mix & less feedback
Use any number of M2R Stereo Receivers (with Personal Mix Control) on the same frequency
Audio-Technica earphones with proprietary dynamic drivers offer full frequency response and outstanding isolation
Personal fit with 3 sizes of rubber eartips plus ear-conforming foam tips
Auxiliary input offers connection point for ambient microphone, click track, or other mic- or line-level input.

M2 Overall System Specifications

Operating Frequencies	Band H1: 754.000 to 787.000 MHz, 100 frequencies
Minimum Frequency Step	25kHz
Modulation Mode	FM stereo
Normal Deviation	±40kHz
Dynamic Range (Typical)	90 dB, A-weighted
Total Harmonic Distortion	<1% at (1 kHz, ±20 kHz Deviation)
Operating Range	100 m, typical
Operating Temperature Range	-5°C ~ 50°C
Frequency Response	60 ~ 13 kHz (±3dB)
Simultaneous Use	10 channels per band (maximum recommended)

M2R Stereo Receiver

Receiving System	Double conversion superheterodyne
Sensitivity	20 dBuV (at 60 dB S/N ratio, 50 ohms termination)
Headphone Output	3.5 mm stereo phone jack; 65 mW (at 32 ohms)
Antenna Input	SMA-type, 50 ohms
Input Connections	3.5 mm TRS stereo phone jack
Battery Type	2 x 1.5V AA (not included)
Battery Current / Life	8 hours (alkaline)
Dimensions	70.0mm x 25.0mm x 110.0mm (W x D x H)
Weight	110g
Current Consumption	EP3 earphone; flexible antenna

M2T Stereo Transmitter

RF Power Output	10 mW / 50 mW (switchable), 50 ohms
Spurious Emissions	Following federal and national regulations
Input Connections	XLRF-type/6.3 mm stereo (1/4″)
Maximum Input Power	+26dBu
Output Connector	XLRF-type/6.3 mm stereo (Loop output)
Power Supply	12-18VDC, 600mA
Antenna Input	Attached whip
Dimensions	210.0mm x 132.0mm x 44.0mm (W x D x H)
Weight	870g
Accessories Furnished	AC adapter; rack mount adapters