The KH 810 10″ Active Studio Subwoofer from Neumann is a professional-grade subwoofer, ideal for tracking, mixing, and mastering applications in music, broadcast, and post production facilities. The sub has a 7.1 HD Bass Manager that is compatible with all standard consumer formats from mono all the way up to more recent 7.1 high-def systems. The subwoofer supports 8 channels of analog audio via XLR connectors for wide compatibility and flexibility in modern studios.
The sub has a sturdy cabinet with a 10″ front-firing woofer. Front-panel bass ports extend low frequency response while reducing compression and turbulence. Because the ports are on the front, you can also position the sub next to a wall or flush mounted into a wall without reducing performance. The sub can be used on its own, daisy-chained with other subwoofers to make a larger system, or used with Neumann full-range monitors for a full multichannel system.
The subwoofer has an integrated 8-channel system volume control and has an RS-232 port for use with an optional remote control. The electronics can be remotely turned on with 2 modes of operation. Using a remote allows centralized system control regardless of the source, and the electronics can be remotely located to reduce cabling. Other features include a bypassable 4th order 80Hz active crossover and 4-mode LFE processing, as well as an electronic limiter to protect the sub’s amplifier and driver.
- 10″ Driver
- The 10″ front-firing driver delivers bass frequencies as low as 18Hz, allowing your main loudspeakers to play at higher volumes with lower distortion. The driver is also magnetically shielded for safe use near video monitors and other electronics
- Bass-Reflex Cabinet
- The rigid wooden cabinet matches other speakers in the family. It has a tough painted finish and high-density rubber isolation feet, plus excellent self-damping properties that minimize cabinet resonance. The large bass ports on the front extend low frequency response while reducing compression and turbulence. They also allow you to position the sub near a wall or flush mounted in a wall without a loss in performance quality. The final result is tight, articulate, and distortion-free low frequency reproduction, even at high volume levels
- 7.1 Channel HD Bass Management
- The integrated electronics provide bass management that’s compatible with all audio formats ranging from mono to 7.1 surround sound. There is independent control of front and back channels for additional flexibility
- 4th Order Crossover
- The bypassable 4th order 80Hz active crossover provides maximum compatibility with consumer formats and delivers seamless system integration
- System Volume Control and Remote Capability
- The sub has an 8-channel system volume control and an RS-232 remote port. This lets you use an optional hardware remote for centralized system control, convenient installation, and less cabling. The sub’s electronics can be remotely powered on with 2 modes of operation; either 0V or 12V triggers
- LFE Gain and Processing
- The KH 810 has 0 and +10dB LFE gain, as well as 4-mode LFE processing that includes LFE to sub and left/right, LFE to sub up to 80Hz, LFE to sub up to 120Hz, and LFE to sub with no filtering for daisy-chaining subwoofers and external signal processors. This guarantees compatibility across all formats and industry standards
- 8 Analog Channels
- The sub supports 8 channels of analog audio via XLR connectors for wide compatibility and flexibility with a variety of systems
- Sum Output and Daisy-Chaining
- The subwoofer’s sum output allows you to create larger systems and Plane Wave Bass Arrays to improve lateral consistency in a listening area
- Acoustic Controls
- Various acoustic controls include output level, low cut, parametric EQ, and 45° step phase control with a built-in test signal to match the sub to your work environment and other system components
- Low Heat Amplifier
- The internal amplifier provides a peak output of 200W and has very low heat dissipation
- Electronic Limiter
- An integrated electronic limiter protects the amplifier and the driver for long-term reliability
-
Woofer 10″ (265 mm) front-firing driver, magnetically shielded Frequency Response 18-300 Hz ±3 dB (-3 dB free field)
19-300 Hz ±2 dB (pass band free field)Noise < 20 dBA @ 10 cm Output 45 Hz @ 95 dB SPL @ 1 m (sine wave output with < 0.5% THD) SPL 110.7 dB (half space @ 3% THD)
106 dB (pink noise, half space @ 1 m)
(averaged between 40-90 Hz)Amplifier Output 160 W continuous, 200 W peak (THD < 0.1%) Controller Analog, active Crossover Frequency 80 Hz Slope 24 dB/oct Equalization Low Cut: 30 Hz, 0 to -12 dB
Parametric: bypassable
Parametric Gain: +4 to -12 dB
Parametric Frequency: 20 to 120 Hz
Parametric Q: 1 to 8Delay Flight Adjustment: 0 to 4.69 ms @ 80 Hz (4-step 0, 45, 90, 135) -180° switch Volume Control Hardware remote or RS-232 Calibration Internal signal generator Protection Peak and thermo limiters Filter Infrasonic, 6.5Hz, 12 dB/oct Remote Control CAT-5 Input/Output Signal 7.1/7+Sum Impedance 13k ohms (XLR) Input Sensitivity -8 and +6 dBu Input Level +19 dBu (6.9 Vrms) per channel CMRR > 60 dB @ 15 kHz Isolation Interchannel: -95 dB, ±0.1 dB (1 kHz, level matching) Control Range 118 dB, 0.25 dB resolution Dynamic Range 110 dBA, < 0.001% THD+N @ -100 dB LFE Gain Range Modes: 80 + re-routing, 80, 120, wide
Gain: 0/+10 dBGain Control +2 to -12 dB Indicators Power On: Red LED
Limit/Clip: Red LED flashing
Bass Management Active: Green LEDPower Requirement 100-120 or 220-240 VAC, switchable Power Consumption Idle: 35 W
Full Output: 290 WConstruction Wood cabinet with painted anthracite (RAL 7021) finish, rubber feet, and metal grille Cabinet Volume Internal: 41.5 liters (net)
External: 76.6 litersDimensions (HxWxD) 14.2 x 13 x 25.4″ (360 x 330 x 645 mm) Weight 57.2 lbs (26 kg) - [contentblock id=17 img=gcb.png]
