The E15 is a trapezoidal, two-way loudspeaker using a 15-inch, 500W, die cast aluminum frame woofer with a 3.5-inch voice coil. It is intended for use when high-power and authoritative low-end are needed from a full-range loudspeaker. A 2.8” compression driver attached to the 75° DMTTM waveguide assures that even distant listeners will be well covered.
E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLDamplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.
Features
- High output, professional quality sound with E15 – 500 W continuous power
- E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.
- Titanium diaphragm for high fidelity and long life
- Rugged tour-grade textured paint
- Foam-lined perforated steel grill
- Available U-Style Yoke and M8 rigging kit for permanent installation
- Dual angle pole socket
| Model | E15 |
| Configuration | 1 x 15-inch, 2-way, non-powered |
| Frequency Range (-6 dB) | 55Hz – 20kHz |
| Power capacity²: continuous/peak | 500 W / 2000 W |
| Sensitivity | 97dB, [email protected] |
| Coverage Angle | 75° conical DMT |
| Output (peak SPL @ 1 m) | 130dB |
| Drivers LF HF | 381 mm (15-inch) driver with 89 mm (3.5-inch) voice coil 38 mm (1.5-inch) exit, 71 mm (2.8-inch) voice coil, compression driver |
| Nominal Impedance | 8Ω |
| Cross-over | Full-range only 1.55kHz |
| Input connectors | 2x NL4, 1 x barrier strip |
| Enclosure | Trapezoidal, plywood, black texture paint finish. Two side-mounted handles, Perforated, powder-coated steel grille with foam lining. |
| Mounting and suspension | 6 x M8 suspension points, dual angle, 35mm pole-socket |
| Net weight | 31 kg / 68 lbs |
| Shipping weight | 34 kg / 75 lbs |
| Dimensions (WxHxD) | 420x716x445mm 16.5×28.2×17.5in |
