RODE Videomic Pro 【已在2015年停產，新型號為 Video Pro R】

產品資料

• 適合 DSLR / DV 拍短片用
• 只要機身有 3.5mm mic-in 就可以使用 （例如: Canon EOS 550D)
• 收音咪可以安裝在 機身的 HOT SHOE 上
• 使用9V電池
• 本購買包括: 咪高峰， 咪線， 防風檔，Hot shoe mount.

Product Highlights

• Directional Video Condenser Microphone
• Mounts to Standard Camera Shoe
• 3.5mm Mini Plug
• Studio-Quality Sound
• 9V Battery Powered
• Integrated Shock Mount
• Can Be Mounted on a Boompole

The RØDE VideoMic Pro is a true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio.

At the heart of the VideoMic Pro is a high resolution 1/2″ condenser capsule that provides broadcast quality audio via a 3.5mm minijack connector (outputting the mono signal to both left and right channels). A super-cardioid polar pattern ensures that surrounding audio is minimised, and your recording is focused on the subject in front of the camera.

An innovative suspension system separates the VideoMic Pro capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. A lightweight and flexible yet robust multi-strand cable provides significantly lower noise transference than traditional audio cable while ensuring a high definition signal.

Easily accessible on the rear face of the microphone are the power, filter and level controls. In addition to the microphone’s native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

Below these controls are the level settings, which attenuate or boost the recorded level as required. The -10dB level attenuation (or PAD) is ideal for recording loud sound sources, such as live music, motorsport, or interviews where the subject is very close to the camera. The +20dB level boost is designed for use with DSLR cameras such as the Canon 5DMkII, Canon 7D, Canon 1D, Canon 550D/T2i, Canon 60D, Nikon D7000, Nikon D5100, Panasonic GH1 and Panasonic GH2. This boost in the microphone output allows the user to reduce the camera’s preamp level (or mic-input level), effectively reducing the amount of noise generated by the camera’s comparatively low quality audio circuitry.

The microphone uses a standard sized shoe mount for on camera use, and features a 3/8″ thread in the base of the mount for easy boom pole mounting. Note that cameras with proprietary shoe mounts will require an adaptor or alternative mounting solution.

The VideoMic pro is battery powered, and provides over 70 hours recording from a single 9V battery.

本購買包括 :

Acoustic Principle	Line Gradient
Active Electronics	JFET impedance converter
Capsule	0.50″
Address Type	End
Frequency Range	40Hz – 20kHz
Output Impedance	200Ω
Maximum SPL	134dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity	-38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Weight	176.00gm
Dimensions	65.00mmH x 102.00mmW x 250.00mmD